Filter
Top Products
Page 23
PRPR
PRPR
PR
OBLEMOBLEM
OBLEMOBLEM
OBLEM
REMEDREMED
REMEDREMED
REMED
Y/ACTIONY/ACTION
Y/ACTIONY/ACTION
Y/ACTION
Belts squeal in neutrBelts squeal in neutr
Belts squeal in neutrBelts squeal in neutr
Belts squeal in neutr
al and/or real and/or re
al and/or real and/or re
al and/or re
vv
vv
v
erseerse
erseerse
erse
Belts squeal in fBelts squeal in f
Belts squeal in fBelts squeal in f
Belts squeal in f
orworw
orworw
orw
ard operard oper
ard operard oper
ard oper
ationation
ationation
ation
ExcessivExcessiv
ExcessivExcessiv
Excessiv
e heat be heat b
e heat be heat b
e heat b
uild up in truild up in tr
uild up in truild up in tr
uild up in tr
ansmission/tine areaansmission/tine area
ansmission/tine areaansmission/tine area
ansmission/tine area
durdur
durdur
dur
ing tillinging tilling
ing tillinging tilling
ing tilling
1. Adjust forward belt guide:
- turn engine off and allow muffler to cool
- disconnect spark plug wire and secure from spark plug
- remove belt guard
- pull down on drive safety control levers
- manually bend forward belt guide so there is 1/16
inch or less clearance between belt guide and belt
- replace belt guard and spark plug wire
1. Adjust tabs on the reverse belt guide
- turn engine off and allow muffler to cool
- disconnect spark plug wire and secure from spark plug
- release drive safety control levers to
neutrneutr
neutrneutr
neutr
alal
alal
al
- remove belt guard
- adjust tabs of reverse belt guide:
while drive safety control levers are released, bend
metal tabs on reverse belt guide to 1/64 inch or less
clearance from reverse belt
- replace belt guard and spark plug wire
1. Remove vegetation by following instructions in Clean
Tine Axle Shaft on page 19 of Maintenance & Storage
section. FOLLOW ALL SAFETY INSTRUCTIONS
2. Check transmission fluid and fill if needed by following
instructions on page 19
Troubleshooting and Repair