Filter
Top Products
Page 9
Adjustments
SECTION CHECKLISTSECTION CHECKLIST
SECTION CHECKLISTSECTION CHECKLIST
SECTION CHECKLIST
Wheel Lockouts
Handlebar Height Adjustment
Depth Regulator Lever
Belt Tension Adjustment
WHEEL LOCKWHEEL LOCK
WHEEL LOCKWHEEL LOCK
WHEEL LOCK
OUTS (6516ROUTS (6516R
OUTS (6516ROUTS (6516R
OUTS (6516R
TB)TB)
TB)TB)
TB)
Place wheels in tilling position.
1. Pull knob in center of wheel out, away from machine.
2. Rotate knob and lockout to align with slot on axle,
release knob. Rotate wheel to align slot in wheel hub
with lockout.
3. Wheel and axle should be firmly locked together
before tilling.
4. Repeat for other wheel.
NONO
NONO
NO
TE:TE:
TE:TE:
TE:
Alw Alw
Alw Alw
Alw
aa
aa
a
ys hays ha
ys hays ha
ys ha
vv
vv
v
e both wheel loce both wheel loc
e both wheel loce both wheel loc
e both wheel loc
kk
kk
k
outs in or out.outs in or out.
outs in or out.outs in or out.
outs in or out.
Do not operDo not oper
Do not operDo not oper
Do not oper
ate tiller with only one wheel locate tiller with only one wheel loc
ate tiller with only one wheel locate tiller with only one wheel loc
ate tiller with only one wheel loc
kk
kk
k
ed.ed.
ed.ed.
ed.
To place wheels in free-wheel position.
1. Pull knob in center of wheel out, away from machine.
2. Rotate knob and lockout to align lockout with detent
in end of axle. Release knob.
3. Wheel should turn freely on axle.
WHEEL LOCKWHEEL LOCK
WHEEL LOCKWHEEL LOCK
WHEEL LOCK
OUTS (5516ROUTS (5516R
OUTS (5516ROUTS (5516R
OUTS (5516R
TB)TB)
TB)TB)
TB)
Place wheels in tilling position.
1. Remove lockpin. Align hole in axle with hole in wheel
hub.
2. Insert lockpin through holes, fold lockpin ring to
secure pin to axle.
3. Wheel and axle should be firmly locked together
before tilling.
4. Repeat for other wheel.
NONO
NONO
NO
TE:TE:
TE:TE:
TE:
Alw Alw
Alw Alw
Alw
aa
aa
a
ys hays ha
ys hays ha
ys ha
vv
vv
v
e both wheel loce both wheel loc
e both wheel loce both wheel loc
e both wheel loc
kk
kk
k
outs in or out.outs in or out.
outs in or out.outs in or out.
outs in or out.
Do not operDo not oper
Do not operDo not oper
Do not oper
ate tiller with only one wheel locate tiller with only one wheel loc
ate tiller with only one wheel locate tiller with only one wheel loc
ate tiller with only one wheel loc
kk
kk
k
ed.ed.
ed.ed.
ed.
To place wheels in free-wheel position.
1. Remove lockpin. Slide wheel inward toward machine.
2. Insert pin in axle only.
3. Wheel should turn freely on axle.
Model
5516RTB
(5.5-hp)
Wheel lockpin in free-wheel position.
(axle hole only)
Wheel lockout in tilling position.
(hub & axle slot)
Model
6516RTB
(6.5-hp)
CAUTION
Never start engine or operate tiller with wheels in free-
wheel position. The free-wheel position is for
transporting the tiller long distances over level ground-
-do not attempt to move the tiller up or down steep
grades in the free-wheel position.