Simplicity 1693847 Tiller User Manual


 
Page 11
DEPTH REGULADEPTH REGULA
DEPTH REGULADEPTH REGULA
DEPTH REGULA
TT
TT
T
OR LEVEROR LEVER
OR LEVEROR LEVER
OR LEVER
Tilling depth is controlled by the height of the depth
regualtor lever.
To adjust tilling depth.
1. Remove detent pin.
2. Raise the depth regulator lever to position tines at
chosen tilling depth.
3. Align hole in depth regulator lever with hole in depth
regulator bracket and replace detent pin.
Adjustments
CAUTION
Always set the depth regulator lever in the transport
position before starting engine, that is, place the detent
pin in the highest hole of the depth regulator lever.
CAUTION
Do not adjust tilling depth unless drive safety control
levers are released to neutral position.
depth regulator
bracket
depth regulator lever
detent pin
Depth Regulator LeDepth Regulator Le
Depth Regulator LeDepth Regulator Le
Depth Regulator Le
vv
vv
v
er Doer Do
er Doer Do
er Do
wn =wn =
wn =wn =
wn =
Shallower tilling. Place
the detent pin in the top hole of the depth regulator lever
for shallowest tilling.
Depth Regulator LeDepth Regulator Le
Depth Regulator LeDepth Regulator Le
Depth Regulator Le
vv
vv
v
er Up = er Up =
er Up = er Up =
er Up =
Deeper tilling. Place the
detent pin in the bottom hole of the depth regulator lever
for deepest tilling.