Filter
Top Products
Safety Rules
l Always refer to the Operator’s Manual for important
details if snowthrower is to be stored for an extended
period.
l Run auger drive a few seconds after completion of
throwing snow to help clear out snow and prevent
freeze-up.
SAFETYDECALS
Safety warning decals are placed at strategic locations
on the snowthrower as a constant reminder to the opera-
tor of the most important safety precautions. All warning,
caution and instructional messages on your snowthrower
should be carefully read and obeyed.
If any of these decals are lost or damaged, replace them
at once. They can be purchased from your local dealer.
l Never operate machine at high transport speeds on
slippery surfaces. Use care when backing up.
l Disengage auger drive when transporting or not in
use.
l Never operate the snowthrower without good
vrstbrlrty
or light. Always be sure of your footing.
l Do not change the engine governor settings or
over-
speed the engine.
MAINTENANCE
&
STORAGE
*
Keep all nuts, bolts and screws tight to ensure that
the equipment is in safe operating condition.
l Never store equipment with gasoline in the tank in a
building where fumes may reach an open flame or
spark. Allow the engine to cool before storing in any
enclosure.
A DANGER
Avoid
injury
from
!
Part No. 1677488
rotating blower:
Shut
011
engine
before
unclogging
discharge chute.
---
A
DANGE,R
q -zjzJEJ
Part No. 1677485
Decal supplied by the engine manufacturer.
See your local Tecumseh dealer.
3