Filter
Top Products
4
This label indicates the minimum distance
between front handle and rear grip per ANSI
B175.3.
READTHE
OPERATOR’SMANUAL
WEARHEARINGAND ANSI Z87.1
APPROVED EYEPROTECTION
KEEP BYSTANDERSAWAY
AT LEAST50 FEET (15m)
BEWAREOFTHROWN OR
RICOCHETEDOBJECTS
DONOT OPERATETHIS
MACHINEWITH ABLADE
50FEET
(15m
)
19422-00028ShindaiwaInc.
READTHE
OPERATOR’SMANUAL
WEARHEARINGAND ANSI Z87.1
APPROVED EYEPROTECTION
KEEP BYSTANDERSAWAY
AT LEAST50 FEET (15m)
BEWAREOFTHROWN OR
RICOCHETEDOBJECTS
DONOT OPERATETHIS
MACHINEWITH ABLADE
50FEET
(15m)
19422-00028ShindaiwaInc.
Be Aware of the Working Environment
Avoid long-term operation
in very hot or very cold
weather.
Make sure bystanders or
observers outside the 50-
foot “danger zone” wear eye
protection.
Be extremely careful of
slippery terrain, especially
during rainy weather.
Always make sure
the appropriate cutting
attachment shield is correctly
installed.
If contact is made with a hard
object, stop the engine and
inspect the cutting attachment
for damage.
When operating in rocky terrain
or near electric wires or fences,
use extreme caution to avoid
contacting such items with the
cutting attachment.
Be constantly alert for objects and
debris that could be thrown either
from the rotating cutting attachment or
bounced from a hard surface.
Reduce the risk of
bystanders being struck
by ying debris. Make
sure no one is within 50
feet (15 meters)—that’s
about 16 paces—of an
operating attachment.
Figure 2
50
FEET
Safety Labels
Figure 3
IMPORTANT
Safety and Operation Information Labels: Make sure all information labels are undamaged
and readable. Immediately replace damaged or missing information labels. New labels are
available from your local authorized Shindaiwa dealer.
T222
F222