Filter
Top Products
ASSEMBLY
SE10-4A/SE15-4A 03/09 Assembly Section 3-4
© 2009 Alamo Group Inc.
ASSEMBLY
5. Install Main Driveline. Attach Driveline Yoke to Mower Divider Gearbox. Tighten Clamping Cone Yoke to 75
lb-ft torque.
6. Attach Slip Clutch end of Wing Driveline to shaft on Divider Gearbox. Insert clamp bolts or clamping cone
depending on driveline type and tighten securely (75 lb-ft torque).
Many of the equipment components are HEAVY (60 lbs or greater) and Special Lifting
Procedures are recommended. Use lifting assistance such as mechanical assistance, two
people, and proper lifting techniques when connecting or installing the driveshaft to reduce
the possibility of back injuries