Filter
Top Products
OPERATION
SE10-4A/SE15-4A 03/09 Operation Section 4-20
© 2009 Alamo Group Inc.
OPERATION
• Ensure the mower hitch is securely attached to
the tractor drawbar with a proper size bolt and
secured nut.
• Ensure that a properly rated safety tow chain is
equipped securing the mower to the tractor.
• Check that the main driveline is securely
attached to the tractor and the clamping cone is
seated in the groove of the PTO shaft.
• Ensure the divider drivelines are secure at both
ends. OPS-R-0008
• Ensure chain guards and/or rubber deflectors
are in position and not damaged. Replace
worn, broken, and missing sections
immediately.
• Ensure the driveline integral shields are in good
condition and rotate freely.
• Inspect that all bolts and screws are in position
and are properly torqued. OPS-R-0009
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety
devices should be inspected carefully at least daily for missing or
broken components. Missing, broken, or worn items must be
replaced at once to reduce the possibility of injury or death from
thrown objects, entanglement, or blade contact.
(SGM-3)