Servis-Rhino SE15-4A Lawn Mower User Manual


 
OPERATION
SE10-4A/SE15-4A 03/09 Operation Section 4-41
© 2009 Alamo Group Inc.
OPERATION
Before transporting the tractor and mower, idle the
tractor engine, disengage the PTO and wait for all
mower moving parts to come to a complete stop.
Once all mower parts are completely stopped, raise
the mower to transport height. NOTE: When
raising the mower, maintain at least 1” clearance
between the driveline and mower deck. If additional
mower deck height is needed for safe transport,
disconnect the driveline from the tractor and secure
its end to the mower deck. The mower can then be
raised to the maximum lift height.. OPS-R-0033
If the tractor’s hydraulic pump is not independent of
the tractor PTO, or if the tractor PTO has to be run
to have hydraulic power, disconnect the mower
driveline from the tractor PTO output shaft. Secure
the driveline to the mower deck to prevent driveline
damage or loss during transport. OPS-R-0034