Filter
Top Products
OPERATION
Operation Section 4-16
OPERATION
FM84A 09/03
© 2004 Alamo Group Inc.
Refer to the tractor operator’s manual to ensure a
complete pre-operation inspection and scheduled
service is performed according to manufacturer
recommendations. The following is a partial list of items
requiring inspection:
¾ Tire condition/air pressure
¾ Wheel lug bolts
¾ Steering linkage
¾ PTO shield
¾ SMV sign is clean and visible
¾ Tractor’s lights are clean and functional
¾ Tractor Seat belt is in good condition
¾ Tractor cab or ROPS is in good condition
¾ ROPS is in the raised position
¾ No tractor oil leaks
¾ Radiator free of debris
¾ Engine oil level and condition
¾ Engine coolant level and condition
¾ Power brake fluid level
¾ Power steering fluid level
¾ Fuel condition and level
¾ Sufficient lubrication at all lube points
¾ Air filter condition
8.1 Tractor Pre-Operation Inspection/Service
8.2 Mower Pre-Operation Inspection/Service
Before each mower use, a complete inspection and service is required to ensure the mower is in a good and safe
working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure the
mower is ready for operation, conduct the following.
¾ Perform scheduled lubrication as detailed in the
maintenance section.
¾ Ensure all decals are in place and legible.
¾ Ensure the driveline is securely attached to tractor.
Make sure the driveline yoke locking collar is
securely seated in the grooves of the PTO shaft by
pushing and pulling the yoke several times.
¾ Inspect that the 3-point hitch pins are the proper
size, correctly installed, and secured to the tractor
lift arms with retaining pins inserted.