Filter
Top Products
4
The ASA 1 active antenna splitter
The ASA 1 active antenna splitter
The ASA 1 active antenna splitter has been designed to enable
routing of UHF antenna signals to several receivers in a multi-
channel system. Up to four diversity receivers may be supplied
with signal by only two antennas. The integral RF amplifiers
ensure that the ASA 1 does not introduce any additional UHF
signal loss.
The ASA 1 incorporates DC distribution to enable simultaneous
powering of up to four receivers and two antenna boosters via
its BNC sockets. The antenna boosters may be required in order
to compensate for cable losses due to long antenna cables.
A single NT 1-1 mains unit (to be ordered separately) is
required to power the ASA 1, the connected receivers and
antenna boosters.
By linking two ASA 1, an 8-channel diversity system can be
operated with only two antennas.
Using the GA 3 rack adapter, two ASA 1 or one ASA 1 and one
stationary receiver (e.g. EM 100 G3, EM 300 G3 or EM 500 G3)
can be mounted into a 19” rack.
The ASA 1 is suitable for the following areas of application:
• Multi-channel RF installations
• Permanent installations in small conference centres and
similar venues
Delivery includes
1 ASA 1 antenna splitter
1 set of device feet
8BNC cables
1 instruction manual
You additionally require the NT 1-1 mains unit with a suitable
mains connector (see “Accessories and spare parts” on
page 17).