Filter
Top Products
8
Putting the ASA 1 into operation
Stacking several ASA 1
You can stack the ASA 1 and the receivers on top of each other.
.
̈ Stack the devices so that the recesses of the stacking
elements completely engage with each other.
Mounting the ASA 1 into a 19” rack
Do not fit the device feet when mounting the ASA 1 into a
19” rack.
CAUTION! Danger of injury due to toppling stacks!
High stacks can easily topple over.
̈ Place the stack on an absolutely flat surface.
̈ Secure the stack against toppling over.
CAUTION! Risks when rack mounting the device!
When installing the device in a closed or multi-rack assembly,
please consider that, during operation, the ambient
temperature, the mechanical loading and the electrical
potentials will be different from those of devices which are not
mounted into a rack.
̈ The ambient temperature within the rack must not exceed
the temperature limit specified in the specifications.
̈ When rack mounting, take good care not to affect the
ventilation required for safe operation. If necessary, provide
additional ventilation.
̈ Make sure that the mechanical loading of the rack is even.
̈ When connecting to the power supply, observe the
information indicated on the type plate. Avoid circuit
overloading. If necessary, provide overcurrent protection.