Filter
Top Products
12
Putting the ASA 1 into operation
Connecting devices to the ASA 1 and switching
the ASA 1 on
Connecting the antennas
̈ You can connect the following antenna types to the antenna
inputs ¶ and º:
– two A 1031-U or A 2003-UHF passive antennas
– or a combination of passive antenna (A 1031-U or
A 2003-U) and antenna booster (AB 3).
Connecting the receivers
You can connect up to four stationary receivers (e.g. EM 100 G3,
EM 300 G3 or EM 500 G3) to the ASA 1. The splitter also
incorporates DC distribution for powering the receivers.
̈ Connect one of the receiver’s antenna inputs to one of the
BNC sockets A1 to A4 ². Suitable BNC cables are included in
the delivery.
These receivers do not require their individual power supply.
They are now powered via the BNC sockets A1 to A4 ².
̈ Connect the other antenna input of the receiver to one of
the BNC sockets B1 to B4 ¾. Suitable BNC cables are
included in the delivery.
Recommendation for optimum reception
To ensure optimum reception even under difficult
reception conditions, we recommend using remote
antennas.
¶º
²
¾