Filter
Top Products
ANDLE
SHIELD
CHUTE _CHUTE
.EXTENSION E;
ELBOW
LATCH
ASSEMBLY
SPACER
_ASSEMBLY
CHUTE
TUBE
LATCH
.__PtN
LATCH
ASSEMBLY
FIGURE 14
\
\
CONTA|NEPt _
FIGURE 15
JTE
EXTENSION
TOP
ELBOW
SHIELD
HUTE
EXTENSION
ASSEMBLY
AS£EMBLY
i,n
YOUR SPRING LOADED MOWER DEFLEC-
TOR SHIELD (FIG, 14} MUST NOT BE
REMOVED. SIMPLY ROTATE IT UP AND
HOLD IN UP POSITION WHILE AT-
TACHING CHUTE EXTENSION. THE
MOWER DEFLECTOR SHIELD CAN BE
RELEASED TO REST AGAINST CHUTE EX-
TENSION. THIS WILL ASSURE DEFLEC-
TOR SHIELD IS STILL ON MOWER IF
CHUTE EXTENSION OF GRASS CATCHER
ATTACHMENT IS REMOVED.
13. Assemble chute extension to mower housing.
a. Insert chute extension pin into latch assembly
spacer (Fig. 14 - R.H. Inset).
b. Lift up slightly on L.H. side of chute extension
lining up spacers located on latch assembly and
chute extension.
c. Secure R.H side of chute extension to latch
assembly using: retainer spring (shown full size
below). Chute extension and retainer spring fur-
nished with grass catcher.
-10-