Filter
Top Products
SAFETY RULES
Never operate the snow thrower near glass
enclosures, automobiles, window wells, drop-
offs, and the like without proper adjustment of
the snow discharge angre. Keep children and
pets away_.
® Never operate the snow thrower at high trans-
port speeds on slippery surfaces_ Look behind
and use care when backing..
e Never direct discharge at bystanders or allow
anyone in front of the snow thrower.
® Do not run the engine indoors, except when
sta_ng the engine and for transporting the
snow thrower in or out of the building_ Open the
outside doors; exhaust fumes are dangerous
(containing CARBON MONOXIDE, an ODOR-
LESS and DEADLY GAS).
e Take all possible precautions when leaving the
snow thrower unattended_. Disengage the au-
gedimpeller, shift to neutral, stop engine, and
remove key,
e Do not overload the machine capacity by at-
tempting to clear snow at too fast a rate.
SAFE STORAGE
e Always refer to Owner's Manual instructions for
important details if the snow thrower is to be
stored for an extended period.
o Disengage power to the auger/impeller when
snow thrower is transported or not in use.
o Never store the snow thrower with fuel in the
fuel tank insidea building where ignitionsources
are present such as hot water and space
heaters, clothes dryers, and the likenAllow the
engine to cool before storing inany enclosure_
REPAIR/ADJUSTMENTS SAFETY
o After striking a foreign object, stop the engine
remove the wire from the spark plug or dis-
connect the cord from the electric motor°
Thoroughly inspect the snow thrower for any
damage and repair the damage before restart-
ing and operating the snow thrower°
® If the snow thrower should start to vibrate
abnormally, stop the engine or electric motor
and check immediately for the cause. Vibration
is generally a warning of trouble.,
® Stop the engine or electric motor whenever
you leave the operating position before un-
clogging the auger/impeller housing or dis-
charge guide, and when making any repairs,
adjustments, or inspections. Removewire form
spark plug or disconnect cord from electric
motor.
• When cleaning, repairing, or inspecting, make
certain the auger/impeller and all moving parts
have stopped. Disconnect the spark plug wire
and keep the wire away from the plug to pre-
vent accidental staRting.
o Never attempt to make any adjustments while
the engine is running (exceptwhen specifically
recommended in this manual).
e Maintain or replace safety and instruction la-
bels, as necessary.
o Run the snow thrower a few minutes after
throwing snow to prevent freeze-up of the
auger/impeller.
LOOK FOR THIS SYMBOL TO POINT OUT
_ IMPOR'[ANT SAFETY PRECAUTIONS. IT
MEANS-ATTENTION!!! BECOME ALERT!I!
YOUR SAFETY IS INVOLVED.
3