Filter
Top Products
Service Electrical - Page 58
SERVICE ELECTRICAL
Using Booster Battery
1. Connect positive (+) booster cable to booster battery
positive (+) post (D).
2. Connect the other end of positive (+) booster cable to
vehicle battery positive (+) post (A).
3. Connect negative (–) booster cable to booster battery
negative (–) post (C).
4. Connect the other end of negative (–) booster cable
(B) to engine ground away from battery.
Replacing Fuse
1. Lift hood.
2. Pull defective fuse (A) out of socket.
3. Check metal clip in fuse window and discard fuse if
clip is broken.
4. Push new fuse into socket.
5. Lower hood.
cCAUTION: Avoid injury. Battery gas is
explosive:
- DO NOT smoke while you charge battery.
- Keep all flames and sparks away.
- DO NOT charge frozen battery.
- DO NOT connect booster battery negative (-)
cable to starting vehicle negative (-) terminal.
IMPORTANT: Avoid machine damage. When
replacing fuse - use the proper replacement fuse
or damage to the circuit may occur.
BOOSTER
BATTERY
VEHICLE
BATTERY
TO ENGINE
GROUND
A
C
B
D
MX1532
A