Filter
Top Products
Service Transmission - Page 49
SERVICE TRANSMISSION
Transmission Oil
NOTE: Your tractor is filled with 5W30 at the factory
When adding transmission fluid:
• S2048 use 5W30 or 10W30.
• S2554 use 5W50 Synthetic.
Check Transmission Fluid Level
1. Park machine on level surface.
2. Allow oil in transmission to cool before checking.
3. On the rear of the tractor, there is a sight hole (A)
through the left rear side of the fuel tank. The
transmission reservoir can be seen through the sight
hole.
4. Check FULL (B) and ADD (C) marks on the reservoir
bottle which will indicate if fluid needs to be added.
5. Add transmission fluid if necessary. (See Adding
Transmission Fluid below.)
Adding Transmission Fluid
1. Tip seat forward and slide seat suspension all the way
forward.
2. Remove cap (A) from transmission reservoir. Cap is
located under seat and left of fuel cap.
3. Fill to correct level using specified transmission oil
(motor oil). DO NOT OVERFILL.
• S2048 use 5W30 or 10W30.
• S2554 use 5W50 Synthetic.
M63559
A
M63557a
B
C
B
C
A