Filter
Top Products
Operating Machine - 9
OPERATING MACHINE
Stopping Engine
1. Push down on foot pedal (A).
2.
Gear units
- Move transmission shift lever (B) to N
(NEUTRAL) position.
Automatic units
- If equipped with shift lever, move shift
lever to N (NEUTRAL) position. If equipped with foot pedal
controls, release either pedal and unit will automatically
return to neutral. If cruise control is engaged, move lever to
OFF position.
3. Pull PTO lever (C) all the way back to the rearward
(OFF) position.
4. Move throttle lever (D) to SLOW (t) position. Let engine
run at low throttle a few seconds.
5. Turn key (E) to OFF position.
6. Remove key.
7. LOCK the park brake.
Using Travel Controls - Gear
TO TRAVEL FORWARD:
1. Push foot pedal (A) all the way forward to the BRAKE
position.
2. Move shift lever (B) to the right and forward to desired
FORWARD position.
3. Slowly release foot pedal to engage machine drive.
TO TRAVEL IN REVERSE:
NOTE: The engine and mower will stop as the shift
lever is moved to the R (REVERSE) position with
mower engaged.
1. Push foot pedal (A) all the way down to STOP tractor.
2. Pull PTO lever (C) all the way back to the rearward
(OFF) position.
3. Look behind the vehicle to be sure there are no
bystanders nearby.
4. Move shift lever (B) to the right and rearward to the R
(REVERSE) position.
5. Release foot pedal slowly.
FOR EMERGENCY STOPPING:
1. Push foot pedal (A) fully to stop machine.
Using Travel Controls - Automatic
c
CAUTION: Avoid injury!
• Before moving forward or rearward, make sure
area is clear of bystanders, especially children.
• Disengage mower or attachment before
backing up.
E
D
A
C
B
B
C
A