Filter
Top Products
7
ASSEMBLY INSTRUCTIONS (Continued)
INSTALLING THE ADAPTER ONTO THE
UPPER VACUUM TUBE - (OPTIONAL
FOR MODEL 310r)
NOTE: Do not install while unit is running.
1. Turn the blower upside down as shown in Fig. 4.
Hold the blower between your knees to install the
adapter and vacuum tubes.
3. Align the adapter's three (3) slots with the unit's three
(3) hooks. Push firmly so all three (3) hooks snap
through (Fig. 7).
Fig. 7
Fig. 4
Tab
Fig. 5
2. Push the door lock tab in the direction shown in Fig. 5
and open the door (Fig. 6).
Fig. 6
4. Align the arrow on the upper tube with the arrow on
the adapter. Slide the upper vac tube onto the
adapter (Fig. 8).
NOTE: The arrows must align properly to install
the vacuum tubes correctly.
Fig. 8