Filter
Top Products
WARNING
Rotating impeller blades can cause severe
injury. Do not attempt to convert the unit while
the engine is running to avoid serious personal
injury. Do not put hands or any other object into
the vacuum tubes while they are installed on
the unit.
1. Remove the blower tubes.
2. Align the grooves in the vacuum bag/elbow tube
assembly with the pins in the blower outlet.
3. Grasping the tube firmly with both hands, push the
vacuum bag/elbow tube assembly into the blower
outlet (Fig. 3). Turn the assembly clockwise until it
snaps into the detent and locks. The curve of the
tube should angle upwards.
6
BLOWER TUBE AND NOZZLE ASSEMBLY
- BOTH MODELS
NOTE: Do not install tubes while unit is running.
1. Align the grooves in the blower tube with the pins in
the blower outlet.
2. Grasping the tube firmly with both hands, push the
tube into the blower outlet (Fig. 1). Turn the tube
clockwise until it snaps into the detent and locks.
ASSEMBLY INSTRUCTIONS
Fig. 1
3. Align the pins of the blower nozzle with the grooves in
the blower tube (Fig. 2).
4. Grasping the nozzle firmly with both hands, push the
nozzle onto the blower tube. Turn the nozzle
clockwise until it snaps into the detent and locks.
NOTE: The blower tube and nozzle or vacuum
bag must be used at all times to prevent
overheating the engine.
Fig. 2
Fig. 3
INSTALLING THE VACUUM BAG/TUBE
ASSEMBLY (OPTIONAL FOR MODEL 310r)