Filter
Top Products
13-5
EVERY
500
-
600
HOURS (SEMIANUAL) CHECKS
and
MAINTENANCE
I
Checks and maintenance Reasons for requiring them
1
Remove cylinder head and remove carbon
deposit.
The engine
will
be out
of
order.
Disassemble and clean carburetor.
13-6
EVERY
1000
HOURS
(YEARLY) CHECKS
and
MAINTENANCE
I
Checks and maintenance
1
Reasons
for
requiring them ~~ ~~
-1
Perform overhauls, clean correct or replace
parts.
The engine output drops and become out
of
order.
Change piston rings
13-7
PREPARATION
for
LONG
ABEYANCE
1)
Perform the above 13-1 and 13-2 maintenance jobs.
2) Drain fuel from the fuel tank and carburetor float chamber.
3)
To prevent rust in the cylinder
bore,
apply oil through the spark plug hole and turn the crankshaft several
turns
by
hand. Re-install the plug.
4)
Turn the starting pulley
by
hand and leave it where the resistance
is
the heaviest,
5)
Clean the engine outside with oiled cloth.
6)
Put a vinyl or other cover over the engine and store the engine in dry place.
-\
-36-