Filter
Top Products
13
Installing the top cover- OUTDOOR KIT ONLY
22. Remove the two pieces ofg metal tape
holding the top panel cover up and
discard.
23. Insert the rear two tabs into the slots on
the heater top and slide the top panel
cover backwards. See Fig. 13.
24. Lower the top panel cover and using your
thumbs, push tabs in and insert the two
front tabs into the slots on the top of the
heater. See Fig. 14.
25. Lower the top panel cover flush to the top
and release the tabs. They will spring
into place as shown in Fig. 15.
26. Turn the gas and electric heater on.