Filter
Top Products
Operation
22
4. If no channels are detected,
NO CH, AVLABLE, BACK TO, and
CHANNEL # (last set channel)
appear. Then
SIG LOSS appears, Ê
flashes, WARNING, ADVISORY
LEDs flash alternatively, and
WATCH LED is on all the time.
5. The Weatheradio
®
monitors the
signal strength at all the times. If
the signal is lost,
SIG LOSS appears,
and
Ê flashes, WARNING,
ADVISORY LEDs flash
alternatively, and WATCH LED is
on all the time.
SETTING THE CLOCK
AND ALARM
1. Press CLOCK to enter alarm
setting mode,
É flashes. If you
have not set the alarm before,
--:--
appears.
2. Hold down
CLOCK for about two
seconds and release.
É and the
alarm hour digits flash.
3. Press
e
or
d
to select the desired
alarm hour.
PM appears to indicate
a PM hour.
4. Press
g
to confirm. The alarm
minute digits flash.