Filter
Top Products
16
Programming
• SINGLE – Receives a SAME alert
signal for the FIPS code
programmed in memory location 1.
1. When
LOCATION and LOCATION
appear, press
g
. The current
response location appears and
LOCATION flashes.
2. Repeatedly press
e
or
d
until the
desired setting (
ALL LOC, SINGLE, or
MULTIPLE) appears.
All Locations
To store all locations, press
g
when ALL
LOC
appears. A beep sounds and the
setting is stored.
LOCATION reappears
and
LOCATION stops flashing.
Single
1. To store a single location, press
g
when
SINGLE appears. 1-------
appears.
2. Press
g
. The first digit of the code
flashes.
3. Press
e
or d to select the first
digit. When the correct number
appears, press
g
to move to the
next digit. If you made a mistake,
press
f
to move back, and then
press
e
or d to correct the
number. Ô
Ô NOTE Ô
• When editing FIP
code,press
g
with "-"
blinking can clear the
entry. ------ is shown to
indicate an empty entry.