Filter
Top Products
15
Programming
press
g
to confirm. A beep sounds,
MISS ALT and REMINDER reappear.
3. Press
MENU to exit.
SIGNAL LOSS REMINDER
If a channel signal becomes weak or is
lost, you can set a reminder to sound.
You must then choose another channel
or relocate the unit for better reception.
1. When
SIG LOSS and REMINDER
appear, press
g
. SIG-ON or SIG-OFF
appears, and
REMINDER flashes.
2. Repeatedly press
e
or
d
to toggle
between
SIG-ON and SIG-OFF, and
press
g
to confirm. A beep sounds,
SIG LOSS and REMINDER reappear.
3. Press MENU to exit.
RESPONSE LOCATION
You can set the Weatheradio
®
to work
with FIPS codes in one of three ways.
• ALL LOC – Receives all SAME
alert signals broadcast within
about a 50-mile radius.
• MULTIPLE – Receives SAME alert
signals for up to nine programmed
FIPS codes.
Description on Signal Loss
Reminder Generation
Sequence
- Signal Loss reminder
will be generated on
interval of 5 seconds, 30
seconds, 1 minute, 1.5
minutes, 2 minutes, 2.5
minutes, ...., up to 5
minutes.
- 3 seconds reminder
beep tone will be
generated at the end of
the interval.
Any key operation will
terminate the reminder.
- If signal loss reminder is
terminated by key,10min
continous signal
detection is necessary
before next reminder
sequence generation.