Filter
Top Products
29
The radio is not
responding properly
to NWS weather alert
broadcasts.
Make sure you programmed
the correct FIPS code(s) into
the Weatheradio’s memory.
See “Programming the Weath-
eradio” on Page 16.
Make sure
PROGRAM/OPER-
ATE
is set to
OPERATE
.
No weather broad-
cast when you press
WEATHER
.
Make sure the telescoping
antenna is fully extended. See
“Using the Built-In Antenna” on
Page 14.
Make sure the Weatheradio is
set to the NOAA channel that is
being broadcast in your area.
See “Programming the Weath-
eradio” on Page 16.
Problems Suggestions
12-251.fm Page 29 Tuesday, March 14, 2000 12:40 PM