Filter
Top Products
19
Storing/Changing FIPS Codes
You can store or change FIPS codes in the Weath-
eradio’s memory (to narrow the area for which you
receive SAME alerts). Your Weatheradio has two
memory locations for FIPS codes.
1. Follow Steps 1–4 under “Selecting a Broadcast
Frequency” on Page 17.
2. To change the FIPS code in the first memory
location, press
SCROLL
. The first digit of the
first FIPS code stored in the Weatheradio
appears.
Or, hold down
CONFIRM
for about 2 seconds to
skip the FIPS code in the first memory location,
then skip to Step 5.
3. Repeatedly press or hold down
SCROLL
until
the first digit of the FIPS code changes to the
one you want, then press
CONFIRM
. A dash (
–
)
appears.
If you enter the wrong digit, press
CLEAR
to
clear it.
12-251.fm Page 19 Tuesday, March 14, 2000 12:40 PM