Filter
Top Products
Operation - Using the Sprayer (continued)
23
CHEMICAL
),*
7. Check drain
cap
Before filling tank, ensure drain cap is securely tightened.
8. Fill tank Add pesticide to tank through fill cap:
a) Confirm the chemical/water dilution ratios specified on the chemical label.
b) Determine chemical and water volumes needed for the planned application,
taking into consideration that maximum tank capacity is 16 gallons.
Note: Only purchase and mix as much chemical as you need for the
planned application in order to minimize chemical overapplication and
the need for storing unused chemicals.
c) Add chemical to the tank through the fill cap.
If the chemical is not pre-mixed, add water and pesticide concentrate in the
order prescribed on the label.
9. Ensure
chemical
mixed
Ensure chemical is thoroughly mixed in tank.
- Stirring device should be made of metal or plastic, non-chemical absorbing
material, and then properly cleaned and stored after use.
10. Replace fill
cap
Re place fill cap and tighten securely.
Drain ca
p