Filter
Top Products
PAGE 28 — GLOBUG LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (07/23/09)
FILTER REPLACEMENT
Remove the balloon as described in the STORAGE 1.
section.
Turn the balloon/lamp assembly upsidedown to access 2.
the fi lter. See Figure 44.
Accessing FilterFigure 44.
Turn the three locking tabs outwards to release the air 3.
plate. See Figure 44.
Remove the air plate and fi lter. See Figure 45.4.
Filter RemovalFigure 45.
AIR PLATE
LOCKING
TAB
AIR PLATE
FILTER
MAINTENANCE
Install a new fi lter and reinstall the air plate.5.
Turn the three locking tabs inwards to lock the air plate 6.
in place. See Figure 46.
Locking Air PlateFigure 46.
LOCK TAB