Multiquip gbe/gbce Landscape Lighting User Manual


 

MAINTENANCE
7. Secure lamp holder on top of the lamp.
8. Reinstall lamp guard.
9. Pull down balloon and zip the bottom zipper to cover
lamp.

1. Unzip the top and bottom of the balloon. See
Figure 31.
Figure 31. Unzipping Balloon
2. Slide out the old or worn balloon over the top of the
lamp guard assembly. See Figure 32.
Figure 32. Removing Old Balloon
NOTICE
Do not use excessive force when screwing the lamp to
prevent lamp from breaking.
UNZIP TOPAND
BOTTOM
ZIPPERS
BALLOON
REMOVE OLD
BALLOON
3. Slide in the new replacement balloon over the top of
the lamp guard assembly. See Figure 33.
Figure 33. Replacing Balloon
4. Zip up the top and bottom of the new balloon. See
Figure 34.
Figure 34. Zipping Up New Balloon
INSTALL NEW
BALLOON
ZIP UP
NEW BALLOON