Filter
Top Products
6
INSTALLATION AND WIRING
●Wire and ferrule specification
Table.4 Wire and ferrule specification
Ferrules and tools are distributed by Phoenix Contact.
●Jumper cable
The jumper cable between S1,S2 and PC terminal between SIC and SD terminal has been installed in the factory
as shown in Fig.2.
Fig.2. Short wire
Before connecting safety input wire to S1,S2 and SIC terminal, remove this jumper cable.
Wire size (mm
2
)
Ferrule with insulation collar Crimping tool name
0.3 / 0.5 AI 0,5-10WH
CRIMPFOX 6
0.75 AI 0,75-10GY
1AI 1-10RD
1.25 / 1.5 AI1,5-10BK
0.75 (combined 2 wire) AI TWIN 2 X 0,75-10GY
AM
2 5 4 1 F/C
+24
SD SD S1 S2 PC A1 B1 C1 A2 B2 C2SICSo
SOC
5 10E 10 SE SE SU
RUN
IPF OL FU PC RL RM RH RT AU SD SD CSSTP
MRS RES
STFSTR
JOG
Terminal block of FR-A800/F800