Filter
Top Products
AVOID
SKIN AND
EYE
CONTACT
Refuelling
FOLLOW
THE
SAFETY
PRECAUTIONS
Be careful and cautious when handling fuels.
The engine must be switched
off.
-
Thoroughly clean the tanks around the screw
plugs to
prevent
did
from entering the fuel or oil tank.
Unscrew
the
plug
and
fill
in
fuel or chain oil
until
it
reaches the
bottom edge of the filler socket. Be careful when refilling.
Do
not
spill
fuel or oil.
Tightly
screw on the
plug.
-
-
Clean screw plug and tank after refuelling.
Mineraloilproductsaswellasoilsdegrease
yourskin.
If
yourskin
comes
in
contact
with
these substances repeatedly and for a
longer period of
time,
it
will
desiccate. Various
skin
deseases
may result.
In
addition, allergic reactions are known.
Eyes can be irritated
by
contact
with
oil.
If
oil comes into your
eyes, immediately wash them
with
clear water.
If
your eyes are
still
irritated, go
to
see a doctor.
Lubricating the chain
In
order
to
ensure sufficient lubrication of the chain there
must
always be enough oil
in
the tank.
Its
contents
is
sufficient for
approx.
1/2
hour of continuous operation.
Adjusting the chain lubrication
@
The motor must be switched
off.
The oil
pump
can be regulated
with
the adjusting screw
(F/l).
The
adjusting screw
is
mounted on the bottom side of the casing.
The oil
pump
has been adjusted to a medium feed quantity
by
MAKITA.
For changing the feed quantity use the universal wrench and
adjust the adjusting screw
(F/1)
in
the following way:
-
-
turn to the right to reduce the quantity
turn to the left to increase the quantity.
To guarantee a troublefree operation of the oil
pump
the oil guide
groove
at
the crank case
(G/2)
and
the
oil inlet bore
in
the guide
bar
(G/3)
must
be cleaned regularly.
13