Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28 Drive Module Site Preparation Guide
FC-1 10x, E2400 10x, FC-1 14x, and E2400 14x Interface
Cables
The drive modules and command modules support Fibre Channel connections to the
command modules. They have four gigabit interface converter (GBIC) connectors, two on
each ESM or controller. The connectors may be fiber optic or copper. The type of
connector depends on what type of drive interface you ordered and what type of cable you
are using to attach the drive module or command module to the command module.
If you ordered optical GBIC connectors, you will need fiber optic cable. If you ordered
copper GBIC connectors, you will need copper wire cable. Table 15 lists the types and
lengths of cable available from your local dealer.
Table 15 Fibre Channel Host and Drive Interface Cables
Descriptions Order Information
Cable Data Size
Transfer
Speed
Range
Part
Number
Length
Fiber optic, multi-mode,
50 micrometer, shortwave
laser
100 MB/sec 1062.5 Mbaud
Up to 0.5
kilometer
006-1086672 2 meter
006-1086416 3 meter
006-1086673 5 meter
006-1086417 10 meter
Copper wire, shielded,
twisted pair, electrical
signal
100 MB/sec 1062.5 Mbaud
Up to 30
meters
006-1086682 2 meter
006-1086672 3 meter
006-1086483 5 meter
006-1086473 10 meter