Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Drive Module Site Preparation Guide
Area Requirements
The floor space at the installation site must provide:
•
Enough stability to support the weight of the drive module or E2400 command
module, and associated equipment (see "Weights" on this page)
•
Sufficient space to install, operate, and service the drive module or E2400 command
module (see "Dimensions" on page 12 and "Airflow" on page 16)
Weights
The drive module’s or E2400 command module’s total weight depends on the number of
components installed in the chassis. Refer to the following weight tables for information
on each model:
•
E3300 drive module – see Table 2 on page 7
•
FC-1 10x drive module – see Table 3 on page 8
•
E2400 10x command module – see Table 4 on page 9
•
FC-1 14x drive module – see Table 5 on page 10
•
E2400 14x command module – see Table 6 on page 11