Filter
Top Products
50
Section 6: Specifications & Capacities
ZXT54 & ZXT60 Pro Series Zero Turning Radius Mowers Riding Mowers 357-271M
2/10/09
Land Pride
Table of Contents
Overall width 55 3/8" 61 3/4"
Overall Length without hitch plate 83"
Tire-to-tire width: 49"
Overall Height 48" to top of seat back and 70 1/2" to top of ROPS
Drive Tires 24 x 10.5 - 12 Turf Tread
Front Tires 13 x 5 - 6, Ribbed tread with roller bearings
Fuel Capacities 12 US GAL
Steering Type Hydrostatic Twin lever steering provides independent control of each drive wheel.
Twin Lever Steering Controls Speed, forward, reverse, brake, and turns.
Steering Turning Radius True zero degree. Turns with counter-rotating independent drive wheels.
Brake Service Hydrostatic dynamic braking.
Park Brake Type Manual activated over-center lever to wet disc brake.
Ground Speed Forward: 0-11 MPH
Reverse: 0-5.5 MPH
Motor Drive Single V-belt with electric clutch and spring tension idler pulley.
Wheel Drive High torque piston type planetary reduction motors
Safety Features Electric logic-control system governs blade engagement, forward & reverse motion,
engine starting & running, and parking brake functions.
Seat Options Deluxe cushion seat with arm rests or
molded vinyl comfort suspension seat with arm rest.
Mainframe Construction Welded steel
Drive Motor Mount Fabricated from 3/16" steel plate.
Front Caster Wheels Free turning with greasable roller bearings.
Front Caster Forks 5/16” steel.
Deck Thickness 11 Gauge decks with 11 gauge doubler plate
and 1/4" reinforcement plate at spindle housing mounts
Box-Section Reinforced Front Edge 11 ga. thick
Deck Trim Edges Solid 1” x 3/8” steel bars for reinforced impact area
Deck Housing Depth 5 1/8” deep, (room for high-capacity mowing)
Deck Lift Foot-operated deck height adjustment with locking pin for setting height.
Hand Operated Controls Ignition switch, throttle lever, control levers, park brake, blade engagement switch,
choke knob and Fuel Tank Selector Valve.
Indicators Engine warning light and hour meter for engine run time.
Cup Holder Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size.
Cutting Height Adjustments Height adjustment in 1/4" increments from 1” to 5”.
Mowing Blades 3 Heavy-duty, heat-treated, high-lift steel blades
.25" x 2 1/2" x 18.8" .25" x 2 1/2” x 20.9”
Blade Tip Speed 18,515 FPM 18,700 FPM
Blade Drive Single B-Section belt drive to all three spindles. Spring tension idler pulleys.
Blade Spindles Machined ductile iron housing, 1" diameter high carbon steel shafts
and greasable ball bearings.
Deck Suspension Four point suspension from frame by mechanical linkage with counter balance springs.
Anti-Scalp Rollers 4 Anti-scalp rollers to improve flotation in rolling and uneven terrain.
ZXT Pro (General Specifications)
Mower Model No ZXT54 ZXT60