![](http://pdfasset.owneriq.net/9/6f/96fd8697-a201-44e8-906d-865d0413b222/96fd8697-a201-44e8-906d-865d0413b222-bg13.png)
17
Section 2: Operating Procedures
2/10/09
ZXT54 & ZXT60 Pro Series Zero Turning Radius Mowers Riding Mowers 357-271M
Land Pride
Table of Contents
To Decrease Speed and Stop
!
WARNING
In the event of a system shutdown while mowing, move control
levers to neutral and spread them fully apart. See Figure 2-4
on Page 14. Also, engage the park brake lever to aid in
slowing and stopping the mower.
Refer to Figure 2-7 on page 17:
Moving control levers an equal distance towards neutral
will decrease travel speed.
• When moving forward, pull back gently on control
levers to decrease speed. The further back the control
levers are pulled the slower the travel speed until
neutral is reached.
• When backing up, push forward gently on control
levers to decrease speed. The further forward the
control levers are pushed the slower the travel speed
until neutral is reached.
• Move control levers to neutral to stop.
• Spread both control levers fully apart and engage the
park brake.
To Steer
Refer to Figure 2-7 on page 17:
• To Steer Straight While Traveling Forward:
Push control levers forward an equal distance.
• To Steer Straight While Backing Up:
Pull control levers rearward an equal distance.
• To Turn Left While Traveling Forward:
Move right control lever farther forward from neutral
than the left control lever.
• To Turn Left While Backing Up:
Move right control lever farther back from neutral
than the left control lever.
• To Turn Right While Traveling Forward:
Move left control lever farther forward from neutral
than the right control lever.
• To Turn Right While Backing Up:
Move left control lever farther back from neutral
than the right control lever.
• To Make A Pivot Turn:
Move one control lever forward and the other
control lever back of neutral, this will allow the drive
wheels to counter-rotate.
Figure 2-7
Front of Mower Faces This Direction
25880