Filter
Top Products
17
5/05/06
RTR10 & RTR15 Series Rotary Tillers 311-431M
Land Pride
Section 3: Adjustments
Table of Contents
Drive Chain
Refer to Figure 3-3:
The tension on the drive chain can be easily adjusted by
using the chain tightener stud. Should backlash occur,
loosen the nut and torque the stud counterclockwise to
20 - 30 foot pounds and tighten nut to 400 foot pounds.
Rear Deflector
Refer to Figure 3-4:
The rear deflector (#1) can be adjusted closer to the
ground to produce a fine soil texture or can be raised to
produce a coarse soil texture. Adjust the chain length by
repositioning the chain (#2) in slot “A”. The chain should
be secured to the rear deflector with wire retaining
pin (#3).
Chain Tightener
Figure 3-3
22251
Rear Deflector
Figure 3-4
22250