Filter
Top Products
17
Section 3 Maintenance and Lubrication
12/14/01
RCR16 Series Rotary Cutters 312-742M
Land Pride
Lubrication
Gauge Wheel Spindle Tube
Type of Lubrication: Grease
Quantity = 6 pumps
Gauge Wheel Hub
The gauge wheel hub is equipped with a relief hole
located directly opposite the grease fitting. The relief
hole releases pressure from inside the hub casting when
it is greased. The hub should be greased until grease
purges from the relief hole.
Type of Lubrication: Multipurpose Grease
Quantity = Until grease purges from the relief hole
8
Gearbox
Check oil level in the gearbox by removing the side plug in
the gearbox case. If the oil level is low, remove the top plug in
the gearbox case and fill with EP90 oil until oil flows from the
side port of gearbox case. Reinstall plugs and tighten.
Type of Lubrication: EP90 Oil
Quantity = Fill until oil flows from the side port of gearbox
case.
NOTE: Do not overfill! Cutter should be level when
checking oil.
8
19745
19745
19745
24
50
Multipurpose
spray lube
Multipurpose
grease lube
Multipurpose
oil lube
Intervals at which
lubrication is required
Lubrication
Legend