Filter
Top Products
10
Section 1 Assembly and Set-Up
RCR16 Series Rotary Cutters 312-742M
12/14/01
Land Pride
Front Rubber Guards
Install front rubber guards center (#1), left hand (#2) and
right hand (#3), as shown in Figure 1-5, with 3/8” x 1” long
Rear Rubber Guard
Refer to Figure 1-6:
Install rear rubber guard (#1) as shown in Figure 1-6, with
3/8” x 3 1/2” long carriage bolts (#3), 3/8” flange nuts (#4)
carriage bolts (#4), and 3/8” flange nuts (#5). Tighten all
nuts and bolts to torque as indicated in the “Torque
Values Chart for Common Bolt Sizes” on page 23.
Front Rubber Guards
Figure 1-5
20640
and spacers (#2). Tighten all nuts and bolts to torque as
indicated in the “Torque Values Chart for Common Bolt
Sizes” on page 23.
Rear Rubber Guard
Figure 1-6
20641