Filter
Top Products
19
Section 4: Maintenance and Lubrication
10/15/07
FDR2572 & FDR2584 Grooming Mowers 310-262M
Land Pride
Table of Contents
Storage
At the end of the working season or when the mower will
not be used for a long period, it is good practice to clean
off any dirt or grease that may have accumulated on the
mower and any of the moving parts.
1. Clean off any dirt or grease that may have
accumulated on the Grooming Mower and moving
parts. Scrape off compacted dirt from the bottom of
the deck and then wash the surface thoroughly with a
garden hose. A coating of oil may also be applied to
the lower deck area to minimize oxidation.
2. Check the blades for wear and replace if necessary,
see Service Mowing Blades, this section on page 17.
3. Inspect the mower for loose, damaged or worn parts
and adjust or replace as needed.
4. Lubricate as noted in the Lubrication portion of this
section starting on page 20.
5. Store the Grooming Mower in a clean, dry place. The
deck should be positioned on a flat surface. Ensure
that the deck is stable.
6. Repaint parts where paint is worn or scratched to
prevent rust. Ask your dealer for Aerosol Land Pride
touch-up paint.
Land Pride Touch-up Paint
Part No. Part Description
821-011C PAINT LP BEIGE SPRAY CAN
821-002C PAINT GP BLACK SPRAY CAN
Driveline Storage
Refer to Figure 4-6:
The FDR25 series mowers are equipped with a driveline
hanger so that the drivelines can be stored up off the
ground.
Driveline Storage
Figure 4-6
19301