Filter
Top Products
17
Section 4: Maintenance and Lubrication
10/15/07
FDR2572 & FDR2584 Grooming Mowers 310-262M
Land Pride
Table of Contents
Section 4: Maintenance and Lubrication
Maintenance
!
CAUTION
For safety reasons, each maintenance operation must be
performed with tractor PTO disengaged, the mower lowered
completely to the ground and the tractor engine shut off with
ignition key removed.
Proper servicing and adjustment is the key to the long life
of any implement. With careful and systematic
inspection, you can avoid costly maintenance, time and
repair.
• After using the mower for several hours, check all bolts
to be sure they are tight and check the tension of the
drive belt. Refer to Belt Tension in the “Adjustments”
section on page 16.
• Lubricate items as listed under Lubrication, this
section, starting on page 20.
• Replace any worn, damaged or illegible safety labels by
obtaining new labels from your Land Pride Dealer.
Information about labels is located under Safety Labels in
the “Important Safety Information” section starting on
page 1.
19328
Inspection of Blades & Sharpening
Figure 4-1
Service Mowing Blades
Blade Inspection
Refer to Figure 4-1:
Blade Wear: As blades wear and are sharpened, the
blade performance will be reduced.
!
DANGER
Bent, Deformed or Split Blades: Should be removed from unit
and discarded. DO NOT attempt to straighten for reuse.
!
WARNING
DO NOT attempt to modify blade, such as hard surfacing, heat
or cold treating and/or by any other method.
!
DANGER
DO NOT try to straighten a blade that is bent. Never weld a
broken or cracked blade. ALWAYS replace with a new Land
Pride blade to assure safety.