Filter
Top Products
37
4. Remove all wiring from the switch
assembly.
Note!
Using long nose pliers, gently
squeeze the lever lock on the top two
spade connection, and pull them off the
switch assembly. Carefully pull the two
lower connections off the switch
assembly.
6. Ease off both thin brown wires attached
to the microswitch. Note the position
of the wires.
5. Carefully pull off the blue wire to the
solenoid, fitted to the flow regulator.
Note the position of the wire.
Microswitch
Spade
Connection
Lever
Lock
Switch Assembly
Solenoid