Filter
Top Products
TP-6905 6/14 31Section 3 RDC2 Controller Operation
3.2.3 LCD Display
The controller isequipped witha two-line x 16 character
backlit liquid crystal diode (LCD) display with adjustable
contrast. When the generator is running, the controller
automatically scrolls through the displays shown in
Figure 3-4. When the system is in AUTO, the LCD
display scrolls through the status messages shown in
Figure 3-5.
When a fault or warning condition exists, the controller
will show the corresponding message. See Section 2.6
for more information on fault and warning messages.
Controller menus display power system information,
including status information for the engine, generator,
and optional RBUS accessories, exercise settings, and
event history. Some menus allow changes to the
controller settings. See Sections 3.6 through 3.19 for
menu diagrams.
tp6810
Genset Status
Running
Voltage: 240V
Freq: 60.0Hz
Engine: 123F
Oil Pressure: 40 psi
Battery
12.3V
Engine Runtime:
27.4 h
Date: 02DEC2014
Time: HR:MNpm
Active Alert
Sample data shown.
Figure 3-4 Autopaging Displays, Generator Running
The display contrast is adjustable. Navigate to the
Genset System menu and step down to the Contrast
screen.PresstheSelectbutton,andthenusetheupand
down arrow buttons to adjust the contrast. See Section
3.5, Changing Settings, and Section 3.11, Generator
Set System Menu.
The display backlightturns off after about aminute ofno
activity.The backlight turnson when abutton ispressed
or when the generator set starts.
tp6810
Genset Status
Standby
Battery
12.3V
Engine Runtime:
27.4 h
Date: 02DEC2014
Time: HR:MNpm
Next Exercise:
09:00p 09Dec2014
Next Maintenance:
150 h or Mar2015
Sample data shown.
Figure 3-5 Autopaging Displays, Automatic Mode