Filter
Top Products
MAINTENANCE
16
MTF-041007C
HOW TO REMOVE THE TOP COVER
1. Remove the screws from the top cover.
2. Remove the top cover.
3. To install the top cover, reverse the above steps.
Figure 10
Top Cover
Screws
HOW TO REMOVE THE BELT COVER
1. The belt cover is fastened with ten screws. Remove all
ten screws.
2. There are five screws on the front of the belt cover.
Three screws on the bottom of the belt cover. Two
screws on the top of the belt cover.
3. Remove the belt cover.
4. To install the belt cover, reverse the above steps.
NOTE: One screw is shorter than the other screws.
Make sure to install screw in the correct location.
Figure 11
3
Belt Cover
Screws