Filter
Top Products
3
SAFETY
This symbol precedes specic safety instructions throughout this manual. When reading
the manual pay close attention to the information that follows this symbol.
FAILURE TO FOLLOW INSTRUCTIONS IN THIS MANUAL COULD RESULT IN PERSONAL
INJURY OR DEATH. READ ENTIRE MANUAL BEFORE OPERATING ROTARY RAKE.
Keep hands, feet and clothing away from the machine’s input power take-off (PTO) and any
other moving parts until the machine has been shut down and the power source has been locked
out. (Refer to Power Source Safety)
Do not adjust, unclog, lubricate, or service the machine until it has been shut down and the
power source has been locked out. (Refer to Power Source Safety)
Do not lubricate or adjust the machine while it is in motion.
Support the rake securely while working under it.
Do not stand between the tractor and the rake while attaching or detaching the rake unless the
tractor engine is shut off and the parking brake has been set.
Be certain all bystanders and animals are a safe distance away from the rake before raising or
lowering it. Never allow anyone to ride on the rake or the tractor.
When transporting, never exceed a speed of 20 MPH (32kkm/hr) and avoid sudden turns which
may compromise the operator’s control of the tractor.
Be constantly aware of the location of the ends of the rake to avoid collision with other objects.
When moving the rake on public roads use the proper reectors, lights, and slow moving vehicle
signs required by local government agencies.
Do not use a power take-off (PTO) shaft without a rotating shield in good working order. Make
sure drive system safety shields are in place for both the power source and the rake.
The rake input PTO must be securely attached to both the power source and the input shaft.
Do not overextend the input PTO shaft.
Make sure PTO is disengaged before starting power source.
PTO shield chains must be attached to the tractor and the rake to keep the shield from rotating.
Power Source Safety