Filter
Top Products
9
HITCHING, CONT’D
With PTO shaft connected to the rake, slide shaft safety collar back and slide the tractor side of
the PTO shaft onto the tractor drive shaft. Release the shaft safety collar. Insure that the PTO
shaft is securely locked onto the tractor drive shaft. Fold the PTO stand down onto the frame to
avoid damaging the PTO shaft shielding. (See illustration below)
Connect the rake hydraulic line to the tractor implement hydraulic output.
Crank the rake jack off of the ground and remove the locking pin. Pull the jack off of the mount,
place in storage position on the main frame, and reinsert locking pin. (See illustration below)
The jack can also be stored on the hitch beam by simply giving it a quarter turn. This position
is not recommended in the eld though as it increases the risk of damaging the jack with the
tractor wheel when turning.