Filter
Top Products
8
HITCHING
14”
Tractor PTO
Shaft
Tractor Drawbar
Rake Driveline
Center Line of Hitch
Pin Hole
Tractor Requirements
The Frontier Rotary Rake is designed to be used with a tractor having a 540 RPM PTO. The
hitch pin hole on the tractor should be 14” (35cm) from the rear of the groove in the PTO output
shaft. (See illustration below)
NOTE: If the hitch pin hole is located well behind the tractor tires there is the potential of making
a sharp enough turn to damage the rake PTO shaft.
Hitching
Align the hole in the tractor draw bar with the hole in the rake tongue and insert an approved
hitch pin. Lock hitch pin with a safety clip to insure that it cannot work its way out. Attach the
safety chain to the tractor.