Filter
Top Products
LUBRICATION and MAINTENANCE
• Lubrication Before Each Use
1.
Driveline Universal Joints
a.
Apply multi-purpose grease with a grease gun.
2.
Driveline Guard
b.
Apply 2-3 shots of multipurpose grease with
grease gun to plastic tting.
3.
Driveline Pro le
c.
Disconnect PTO Driveline.
d.
Pull two sections apart.
e.
Apply thin coat of multi-purpose grease
to inside of female section.
f.
Re-assemble sections.
Note: Pull each section to be sure driveline and shields
are
securely connected. Make certain PTO shielding is in good
condition. Do not grease outer or inner plastic shields.
4.
Tailwheel Pivot Tube
g.
Apply multi-purpose grease with grease gun.
5.
Tailwheel
h.
Apply multi-purpose grease with grease gun.
6.
Gearbox
i.
Check oil level by removing oil level check
plug on side of gearbox.
j.
Add EP80-90W gear oil if necessary to bring
oil level to check plug hole.
Lubrication and Maintenance 21
(6) Before Each Use
(5) Before Each Use
(5) Before Each Use
(4) Before Each Use
(4) Before Each Use
(3) Before Each Use
(3) Before Each Use
(2) Before Each Use
(2) Before Each Use
(1) Before Each Use
(1) Before Each Use
d.
Pull two sections apart.