Filter
Top Products
Contents
Page Page
Extending/Retracting Cylinder...............60-4 Fill Fuel Tank ...........................85-3
Lubricant Storage ........................85-3Disconnecting Hoses .....................60-5
Diesel Engine Coolant ....................85-4
Use Correct Transmission-Hydraulic Filter
Drawbar and PTO
Element .............................85-5
Observe Drawbar / Wagon Hitch Load
Transmission and Hydraulic Oil .............85-5
Limitations............................65-1
Grease ................................85-6
Stay Clear of Rotating Drivelines ............65-1
Attaching PTO-Driven Implement ............65-2
Operating Tractor PTO (Standard) ...........65-3
Service and Maintenance
Operating Tractor Dual PTO (Optional) .......65-4
Observe Service Intervals..................90-1
Adjusting PTO Clutch Operating Rod .........65-5
Break-In Service.........................90-1
Service Intervals.........................90-2
Ballast
Planning for Maximum Productivity...........70-1
Service—Every 10 Hours
Selecting Ballast Carefully .................70-1
Check Engine Oil Level ...................95-1
Matching Ballast to Load Work..............70-1
Check Coolant Level .....................95-1
Measuring Wheel Slip—Manually ............70-2
Drain Water and Sediment From Fuel
Ballast Limitations........................70-3
Tank and Fuel Filter ....................95-2
Ballasting Front End for Transport ...........70-4
Water Separator Bowl ....................95-3
Ballasting Tractor ........................70-5
Lubricate as Necessary ...................95-3
Determining Maximum Rear Ballast ..........70-5
Determining Maximum Front Ballast..........70-5
Service—Every 50 Hours
Using Cast Iron Weights...................70-6
Check Transmission-Hydraulic System
Installing Rear Cast Iron Weights ............70-6
Oil Level ............................100-1
Using Liquid Weight ......................70-7
Clean and Check Battery .................100-1
Lubricate Front Axle Pivot Pin .............100-1
Wheels, Tyres and Treads
Lubricate Steering Spindles ...............100-2
Service Tyres Safely .....................75-1
Inspect Tyres and Loose Hardwares ........100-2
Check Implement-to-Tyre Clearance .........75-1
Check Tyre Inflation Pressure ..............75-2
Service—Every 250 Hours
Tyre Inflation Pressure Chart ...............75-3
Change Engine Oil and Filter ..............110-1
Tighten Wheel/Axle Hardware Correctly .......75-3
Service Air Cleaner .....................110-2
Tighten Bolts—Adjustable Front Axle .........75-4
Inspect and Adjust Alternator/Fan Belt .......110-2
Tighten Bolts—Rear Axle ..................75-5
Lubricate 3-Point Hitch ...................110-3
Observe Rear Wheel Tread Width Limitations . . 75-5
Check Neutral Start System ...............110-3
Tread Settings—Multi-Position Rear Wheels . . . 75-6
Check and Adjust Clutch Pedal Free Play ....110-4
Tread Settings—Adjustable Front Axle ........75-7
Adjust Front Axle Tread Width ..............75-9
Service—Every 500 Hours
Checking Toe-In........................75-10
Replace Fuel Filter ......................115-1
Adjusting Toe-In ........................75-11
Replace Transmission-Hydraulic Filter .......115-1
Transporting
Use Safety Lights and Devices..............80-1
Service—Every 600 Hours
Driving Tractor on Roads ..................80-1
Clean Engine Crankcase Vent Tube.........115-1
Transport on Carrier......................80-4
Pack Front Wheel Bearings ...............115-1
Towing Tractor ..........................80-4
Check Hoses and Hose Clamps for
Tightness ...........................115-2
Lubricate Rear Axle Bearings..............115-2Fuels, Lubricants and Coolant
Handle Fuel Safely—Avoid Fires ............85-1 Check Engine Idle Speeds ................115-3
Check Front Axle Pivot Pin................115-3Handle Fluids Safely—Avoid Fires ...........85-1
Diesel Engine Oil ........................85-2 Adjust Engine Valve Clearance ............115-3
Fuel Storage............................85-2
Diesel Fuel .............................85-2
Continued on next page
ii
082206
PN=2