Filter
Top Products
Safety
DX,TORCH –19–10DEC04–1/1
Avoid Heating Near Pressurized Fluid Lines
TS953 –UN–15MAY90
Flammable spray can be generated by heating near
pressurized fluid lines, resulting in severe burns to
yourself and bystanders. Do not heat by welding,
soldering, or using a torch near pressurized fluid lines or
other flammable materials. Pressurized lines can
accidentally burst when heat goes beyond the immediate
flame area.
DX,FLUID –19–03MAR93–1/1
Avoid High-Pressure Fluids
X9811 –UN–23AUG88
Escaping fluid under pressure can penetrate the skin
causing serious injury.
Avoid the hazard by relieving pressure before
disconnecting hydraulic or other lines. Tighten all
connections before applying pressure.
Search for leaks with a piece of cardboard. Protect hands
and body from high pressure fluids.
If an accident occurs, see a doctor immediately. Any fluid
injected into the skin must be surgically removed within a
few hours or gangrene may result. Doctors unfamiliar with
this type of injury should reference a knowledgeable
medical source. Such information is available from Deere
& Company Medical Department in Moline, Illinois, U.S.A.
AG,OUO1032,2682 –19–30SEP99–1/1
Service Cooling System Safely
TS281 –UN–23AUG88
Explosive release of fluids from pressurized cooling
system can cause serious burns.
If radiator cap must be removed, do not remove when
engine is hot. Shut engine off and wait until cap is cool
enough to touch with bare hands. Slowly loosen cap to
first stop to relieve pressure before removing completely.
05-11
082206
PN=17