Filter
Top Products
Contents
Page Page
Safety ................................05-1
Working With Speed/Hour Meter ............45-7
Stopping the Engine ......................45-8
Safety Signs ...........................10-1
Using Booster Battery.....................45-8
Controls and Instruments
Driving the Tractor
Tractor Controls .........................15-1
Operator Training Required ................50-1
Instrument Panel ........................15-3
Driving on Public Roads ...................50-1
Operating Transmission ...................50-3
Lights
Shifting Transmission .....................50-3
Light Switch Positions.....................20-1
Selecting a Gear ........................50-4
Using Headlights ........................20-2
Using Brakes ...........................50-4
Using High Beam Indicator.................20-2
Using Differential Lock ....................50-5
Using Tail Lights.........................20-3
Stopping Tractor.........................50-6
Using Turn Signals.......................20-4
Using Hazard Lights......................20-5
Rockshaft and 3-Point Hitch
Using Flood Lamp .......................20-6
Match Tractor Power to Implement...........55-1
Seven-Terminal Outlet—If Equipped..........20-6
3-Point Hitch Components .................55-1
Rockshaft Control Levers ..................55-2
Operator’s Platform
Setting Position Control Lever Stop ..........55-2
Selecting Seat Position....................25-1
Using Rockshaft Position Control ............55-3
Adjusting Ride Comfort....................25-1
Using Draft Control.......................55-4
Adjusting Rockshaft Rate-of-Drop/
Break-In Period
Implement lock ........................55-5
Observe Engine Operation Closely...........35-1
Preparing Implement .....................55-5
Break-In Service.........................35-1
Positioning Center Link....................55-6
Attaching Implements to 3-Point Hitch ........55-7
Prestarting Checks
Adjusting Hitch Side Sway .................55-8
Service Daily Before Start-Up...............40-1
Leveling the Hitch........................55-9
Adjusting Lateral Float ...................55-10
Operating the Engine
Adjusting Rockshaft Control Lever Friction ....55-10
Before Starting the Engine .................45-1
Warming Hydraulic System Oil .............55-11
Starting the Engine.......................45-2
Check Instruments After Starting ............45-3
Remote Hydraulic Cylinders
Oil Pressure Indicator.....................45-3
Use Correct Hose Tips....................60-1
Charging System Indicator .................45-3
Control Lever and Coupler Identification—If
Air Restriction Indicator ...................45-4
Equipped ............................60-1
Coolant Temperature Gauge ...............45-4
Connecting Hoses .......................60-2
Watch Fuel Level ........................45-4
Connecting Single-Acting Cylinder ...........60-3
Changing Engine Speeds..................45-5
Correcting Reversed Cylinder Response ......60-3
Warming Up the Engine ...................45-5
Restart Stalled Engine ....................45-6 Neutral Lever Position ....................60-3
Avoid Idling the Engine....................45-6
Observe Engine Work and Idle Speeds .......45-7
Continued on next page
All information, illustrations and specifications in this manual are based on
the latest information available at the time of publication. The right is
reserved to make changes at any time without notice.
COPYRIGHT
2003
DEERE & COMPANY
Moline, Illinois
All rights reserved
A John Deere ILLUSTRUCTION
Manual
i
082206
PN=1